R.O water Treatment Plants

• We have designed this system to produce permeate flow 500 Liters per hour.
• Maximum TDS Level of Raw Water (input) upto 2000 ppm.

• The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
• The system of recovery is properly maintained corresponding to the raw water TDS.
• RO feed water limiting conditions as mentioned below are strictly maintained,

We offer the high quality of the Reverse Osmosis Plant to our customer. We are the leading Manufacturer and Supplier of Reverse Osmosis Plant.

Typically, water of TDS concentration higher than 500 mg/L and lower or equal to 15,000 mg/L (15 ppt) is classified as brackish. Natural water sources such as sea, bay and ocean waters which have TDS concentration higher than 15,000 mg/L are generally classified as seawater.

Reverse Osmosis is very effective in treating brackish, surface and ground water for both large and small flows applications. Some examples of industries that use RO water include pharmaceutical, boiler feed water, food and beverage, metal finishing and semiconductor manufacturing to name a few.